Dynamic error characteristics of touch trigger probes used with coordinate measuring machines

This paper discusses the dynamic error characteristics of touch trigger probes used with coordinate measuring machines. During the investigation, a number of important parameters have been identified, including measurement speed, probe longitude, approach distance, probe latitude, stylus length/stylus tip diameter, probe orientation, operating mode (scanning and nonscanning), scan pitch, preload spring force (gauging force), probe type, and the surface approach angle. This paper presents the detailed experimental design and the results obtained from the systematic experiments. These results have led to some useful recommendations for the reduction of the probe dynamic errors. Some of these recommendations included the selection of the optimum measurement speed, the setting of the preload spring force, and the choice of the probe type

Validation of a fault-tolerant clock synchronization system

A validation method for the synchronization subsystem of a fault tolerant computer system is investigated. The method combines formal design verification with experimental testing. The design proof reduces the correctness of the clock synchronization system to the correctness of a set of axioms which are experimentally validated. Since the reliability requirements are often extreme, requiring the estimation of extremely large quantiles, an asymptotic approach to estimation in the tail of a distribution is employed

The output distribution of important LULU-operators

Two procedures to compute the output distribution phi_S of certain stack filters S (so called erosion-dilation cascades) are given. One rests on the disjunctive normal form of S and also yields the rank selection probabilities. The other is based on inclusion-exclusion and e.g. yields phi_S for some important LULU-operators S. Properties of phi_S can be used to characterize smoothing properties of S. One of the methods discussed also allows for the calculation of the reliability polynomial of any positive Boolean function (e.g. one derived from a connected graph).Comment: 20 pages, up to trivial differences this is the final version to be published in Quaestiones Mathematicae 201

Investigation of potential of differential absorption Lidar techniques for remote sensing of atmospheric pollutants

The NASA multipurpose differential absorption lidar (DIAL) system uses two high conversion efficiency dye lasers which are optically pumped by two frequency-doubled Nd:YAG lasers mounted rigidly on a supporting structure that also contains the transmitter, receiver, and data system. The DIAL system hardware design and data acquisition system are described. Timing diagrams, logic diagrams, and schematics, and the theory of operation of the control electronics are presented. Success in obtaining remote measurements of ozone profiles with an airborne systems is reported and results are analyzed

Synchronization and fault-masking in redundant real-time systems

A real time computer may fail because of massive component failures or not responding quickly enough to satisfy real time requirements. An increase in redundancy - a conventional means of improving reliability - can improve the former but can - in some cases - degrade the latter considerably due to the overhead associated with redundancy management, namely the time delay resulting from synchronization and voting/interactive consistency techniques. The implications of synchronization and voting/interactive consistency algorithms in N-modular clusters on reliability are considered. All these studies were carried out in the context of real time applications. As a demonstrative example, we have analyzed results from experiments conducted at the NASA Airlab on the Software Implemented Fault Tolerance (SIFT) computer. This analysis has indeed indicated that in most real time applications, it is better to employ hardware synchronization instead of software synchronization and not allow reconfiguration

Less government intervention in biodiversity management: risks and opportunities

n a changing global environment, with increasing pressure on ecosystem goods and services, biodiversity conservation is likely to become increasingly important. However, with the current global financial crisis, governments are increasingly trying to stabilise economies through spending cuts aiming to reduce national deficits. Within such an economic climate, the devolution of governance through public participation is an intrinsically appealing concept. We outline a number of challenges that explain why increased participation in biodiversity management has been and may continue to be problematic. Using as a case study the local stakeholder-driven Moray Firth Seal Management Plan in Scotland, we identify four key conditions that were crucial to the successful participatory management of a biodiversity conflict: a local champion, the emergence of a crisis point, the involvement of decision-makers, and long-term financial and institutional support. Three of the four conditions point to the role of direct government involvement, highlighting the risk of devolving responsibility for biodiversity conflict management to local communities. We argue that without an informed debate, the move towards a more participatory approach could pose a danger to hard-won policy gains in relation to public participation, biodiversity conservation and conflict management

An experimental/analytical program to assess the utility of lidar for pollution monitoring

The development and demonstration of lidar techniques for the remote measurement of atmospheric constituents and transport processes in the lower troposphere was carried out. Particular emphasis was given to techniques for monitoring SO2 and particulates, the principal pollutants in power plant and industrial plumes. Data from a plume dispersion study conducted in Maryland during September and October 1976 were reduced, and a data base was assembled which is available to the scientific community for plume model verification. A UV Differential Absorption Lidar (DIAL) was built, and preliminary testing was done

The social geography of childcare: 'making up' the middle class child

Childcare is a condensate of disparate social forces and social processes. It is gendered and classed. It is subject to an excess of policy and political discourse. It is increasingly a focus for commercial exploitation. This is a paper reporting on work in progress in an ESRC funded research project (R000239232) on the choice and provision of pre-school childcare by middle class (service class) families in two contrasting London locations. Drawing on recent work in class analysis the paper examines the relationships between childcare choice, middle class fractions and locality. It suggests that on the evidence of the findings to date, there is some evidence of systematic differences between fractions in terms of values, perspectives and preferences for childcare, but a more powerful case for intra-class similarities, particularly when it comes to putting preferences into practice in the 'making up of a middle class child' through care and education

The Mid-infrared Fine-structure Lines of Neon as an Indicator of Star For mation Rate in Galaxies

The fine-structure lines of singly ([Ne II] 12.8 micron) and doubly ([Ne III] 15.6 micron) ionized neon are among the most prominent features in the mid-infrared spectra of star-forming regions, and have the potential to be a powerful new indicator of the star formation rate in galaxies. Using a sample of star-forming galaxies with measurements of the fine-structure lines available from the literature, we show that the sum of the [Ne II] and [Ne III] luminosities obeys a tight, linear correlation with the total infrared luminosity, over 5 orders of magnitude in luminosity. We discuss the formation of the lines and their relation with the Lyman continuum luminosity. A simple calibration between star formation rate and the [Ne II]+[Ne III] luminosity is presented.Comment: To appear in ApJ. 8 page